Friday, November 1, 2019

Understand the basics of a wandering management system

Migrant prevention systems have been in use for approximately 25 years and are mainly used in hospitals, elderly communities and group homes. They are recognized as Wanderguard, the brand manufactured by Stanley Senior Technologies. However, this term has become a generic name for all these systems, just as the name Xerox has become synonymous with photocopying.

If an installation mentions that they have a vandal protection system, they simply imply that they have a faulty management system not created by Stanley Senior Technologies. Some other important brands of these devices include; Code Alert by RF Technologies, Roam Alert and Watchmate recently acquired brands by Stanley Senior Technologies, ResidentGuard from Accutech and eventually Securecare brand systems. If you want to place your loved ones with concerns related to Alzheimer's or dementia in an elderly care center, make sure you understand well how the system works and how staff are trained to respond to these situations.

Migratory behavior is usually news when a resident leaves a care center; such as an old-age home, an assisted living center, or a nursing home and door. Omissions make up about ten percent of lawsuits against facilities, and 70 percent of them involve the death of a resident. It is known that most of the residents with whom this happens are at risk to staff before the event takes place. The main causes of death or injury in these situations are:

- Exposure to heat or cold.
- drowning
- Traffic-related injuries.

Elopements is considered one of the 28 events that are never serious and avoidable. This behavior affects about ten percent of senior citizens. It may occur in higher percentages in nursing homes or if the facility has a larger demographic of residents of public payers. There are two main types of migratory alarms that an installation can use to alert staff to leaks.

The first type of security is a perimeter alarm. This is an alarm that is usually triggered with a simple door contact switch. The alarms of the staff if a door that is not allowed to open have done so, regardless of who opened it. Some facilities prefer to add the keyboard or card reader to the staff so that authorized and educated people can pass through the door without sounding alarms. This helps make these doors workable without causing alarms that disturb both residents and staff. Assuming there is a properly trained and engaged staff, this system works well in small facilities if they do not provide referral codes to visitors.

The other type of alarm is the hiker management or the water guard system. These systems generally involve a type of antenna system connected to a controller and a door contact switch. Residents at risk use a wrist or an ankle transmitter. When a person with a transmitter approaches a door protected by this type of system, the antenna highlights the occupant's transmitter. It provides free access for any employee, visitor or resident in or outside the available parts of the facility. In most cases, the door should open for alarm. Separating the system so that alarm events can occur reduces false alarms. This helps ensure that employees do not become insensitive by a system that always shuts down For more information visit this website www.greetly.com/visitor-management-system

Migrant systems are a great tool to help keep residents at risk, but as with all tools, the system needs to be maintained. If it is a concern for you to find a facility that has a good walking prevention system because of your loved one, remember to ask and understand how it works, how the staff is trained to respond and how it is maintained. A walking system alone will not keep your loved ones safe if the staff is not engaged.

No comments:

Post a Comment